I had the exact same issue on Windows.
Windows Setup with Oak-D Lite has an issue
CalvinA Did you resolve it with this solution?
Sadly, even with doing the manual setup, things are not working. I performed git clone, then ran the python installation script (python install_requirements.py) without issue (all packages installed... also I only have python 3 installed and so the executable is simply "python" as opposed to "python3". When I execute the demo script (depthai_python) I get the following messages:
E:\Projects\DepthAI\depthai>python depthai_demo.py
Using depthai module from: C:\Users\sam\AppData\Roaming\Python\Python39\site-packages\depthai.cp39-win_amd64.pyd
Depthai version installed: 2.13.3.0
Setting up demo...
Available devices:
[0] 18443010F158AB1200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for MonoCamera node and left xlink stream...
Creating MJPEG link for MonoCamera node and right xlink stream...
Creating MJPEG link for ColorCamera node and color xlink stream...
Error while running demo script... Command '"C:\Users\sam\AppData\Local\Programs\Python\Python39\python.exe" depthai_demo.py --noSupervisor --guiType qt' returned non-zero exit status 3221226505.
Waiting 5s for the device to be discoverable again...
Setting up demo...
Available devices:
[0] 18443010F158AB1200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for ColorCamera node and color xlink stream...
Traceback (most recent call last):
File "E:\Projects\DepthAI\depthai\depthai_demo.py", line 986, in <module>
s.runDemo(args)
File "E:\Projects\DepthAI\depthai\depthai_helpers\supervisor.py", line 46, in runDemo
subprocess.check_call(' '.join([f'"{sys.executable}"', "depthai_demo.py"] + new_args), env=new_env, shell=True, cwd=repo_root)
File "C:\Users\sam\AppData\Local\Programs\Python\Python39\lib\subprocess.py", line 373, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '"C:\Users\sam\AppData\Local\Programs\Python\Python39\python.exe" depthai_demo.py --noSupervisor --guiType cv' returned non-zero exit status 3221226505.
Sentry is attempting to send 2 pending error messages
Waiting up to 2 seconds
Press Ctrl-Break to quit
My Python version is 3.9.5. and so I am going to install the latest version and see if anything changes.
Cheers, Sam
erik Good day Erik, no worries, and thanks for checking into this! I have a new Win10 laptop (i7, etc) and so I will try the installation process on it and see if I get the same result. This way I can somewhat rule out any computer related issue. I will report back with the results later today or tomorrow. Cheers, Sam
sam512bb Hi Sam,
I found out that the exit code you see - 3221226505 - is 0xc0000409 in hex and on Windows means STATUS_STACK_BUFFER_OVERRUN
I've experienced a similar issue on my Windows machine, but only when accessing PoE devices and even then, it didn't happen every run - but I also got a different code - 3221225477 being 0xC0000005, which stands for STATUS_ACCESS_VIOLATION
I'm sorry you experienced it, will be investigating it further
Luxonis-Lukasz Good day Lukasz,
Thanks for the info and the update! Also, no need to apologize for issues like this, as it tends to be the price of new tech... and with working with Windows . I, also, design and manufacture specialty electronic devices and so I am very aware of the challenges you all face and especially so with supporting the number and diversity of platforms that you do. If anything your and your colleagues should be commended and thanked for the prompt responses to these issues.
Cheers, Sam
sam512bb Thanks a lot for your kind words and understanding!
Hi, I got OAK D Lite today and I am facing exact same issue. Appreciate if you can help with this
Hello Sayi , did you use the latest installer? There were a few issues with the old one, so folks are encouraged to use the latest one.
Thanks, Erik
I also got this issue. On Windows 10 64 bit, with Python 3.10.0.
Errorlog:
Using depthai module from: C:\Users\Marcel-Jan\AppData\Roaming\Python\Python310\site-packages\depthai.cp310-win_amd64.pyd
Depthai version installed: 2.13.3.0
Setting up demo...
Available devices:
[0] 1944301091D6F31200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for MonoCamera node and left xlink stream...
Creating MJPEG link for MonoCamera node and right xlink stream...
Creating MJPEG link for ColorCamera node and color xlink stream...
Error while running demo script... Command '"D:\Python\Python310\python.exe" depthai_demo.py --noSupervisor --guiType qt' returned non-zero exit status 3221226505.
- Edited
Having similar issues on Windows 10
========= Starting: Launcher (2022-01-02 16:06:57.455706) =========
HEAD detached at v3.0.7
Changes not staged for commit:
(use "git add/rm <file>..." to update what will be committed)
(use "git restore <file>..." to discard changes in working directory)
deleted: launcher/windows/build.ps1
deleted: launcher/windows/download_dependencies.ps1
deleted: launcher/windows/inno_setup.ps1
Untracked files:
(use "git add <file>..." to include in what will be committed)
false/
no changes added to commit (use "git add" and/or "git commit -a")
Available DepthAI versions: ['v0.3.0.0', 'v0.4.0.0', 'v0.4.1.1', 'v1.0.0', 'v1.0.0.0', 'v2.0.0', 'v2.10.0.0', 'v2.7.2.0', 'v2.8.0.0', 'v2.9.0.0', 'v3.0.0', 'v3.0.1', 'v3.0.2', 'v3.0.3', 'v3.0.4', 'v3.0.5', 'v3.0.6', 'v3.0.7']
Current tag: v3.0.7
, ver: 3.0.7
Using depthai module from: C:\Users\frank\AppData\Local\Programs\DepthAI\venv\lib\site-packages\depthai.cp39-win_amd64.pyd
Depthai version installed: 2.13.3.0
Setting up demo...
Available devices:
[0] 18443010318BAC1200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for MonoCamera node and left xlink stream...
Creating MJPEG link for MonoCamera node and right xlink stream...
Creating MJPEG link for ColorCamera node and color xlink stream...
Error while running demo script... Command '"C:\Users\frank\AppData\Local\Programs\DepthAI\venv\Scripts\python.exe" depthai_demo.py --noSupervisor --guiType qt' returned non-zero exit status 3221226505.
Waiting 5s for the device to be discoverable again...
Setting up demo...
Available devices:
[0] 18443010318BAC1200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for ColorCamera node and color xlink stream...
then GUI shuts down
Couple of things I've tried, based on things I found when searching for this exit status:
- Updated my NVidia driver to the latest.
- Installed the latest Python (3.10.1) on the C: drive instead of the D: drive
But that wasn't it.
I used the usb3.0 interface and the problem was solved.
frankgestrada Marcel-Jan could you try using USB3 cable? We don't have a solution for these Windows error codes yet
Luxonis-Lukasz I've ordered a new USB3 to USB C cable, just to be sure that I have a high speed one. It will arive tomorrow. I will test it then.
Luxonis-Lukasz Definitely the cable. I am up and running now. Thank you.
Yes, I got it working with a new high speed USB3 cable.