Windows Setup with Oak-D Lite has an issue
Hi guys,
Could you give v3.0.8 a try? https://github.com/luxonis/depthai/releases/tag/v3.0.8
I tested it on my Windows machine, which was failing with the above mentioned exit codes, but with the performance optimizations, this issue seems to be resolved, tried both USB2, USB3 and PoE devices with both QT and CV GUI and they all work
I've installed v3.0.8, but it didn't work with the old USB-C cable. I got the same error.
Also, the DepthAI icon in the Start Menu didn't go anywhere. Windows seems to want to open an .ico file.
Also, the DepthAI icon in the Start Menu didn't go anywhere. Windows seems to want to open an .ico file.
@Marcel-Jan could you elaborate on this? After uninstall, all files should be removed, so maybe we'll need to make adjustments to the installer here
Luxonis-Lukasz I've uninstalled all previous versions of DepthAI. After installing 3.0.8 again, I got a different exit status on the "lesser" USB cable:
Available devices:
[0] 1944301091D6F31200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for MonoCamera node and left xlink stream...
Creating MJPEG link for MonoCamera node and right xlink stream...
Creating MJPEG link for ColorCamera node and color xlink stream...
Error while running demo script... Command '"C:\Users\Marcel-Jan\AppData\Local\Programs\DepthAI\venv\Scripts\python.exe" depthai_demo.py --noSupervisor --guiType qt' returned non-zero exit status 3221225477.
Waiting 5s for the device to be discoverable again...
When I try starting DepthAI from the Start Menu, I get "How do you want to open this file" and it says it's an .ico file.
The shortcut in the start menu indeed points to "C:\Users<myuser>\AppData\Local\Programs\DepthAI\logo_only_EBl_icon.ico"
Thanks a lot Marcel-Jan! The icon issue should be resolved pretty quickly, with the windows one we don't have a solution yet, will be investigating and circle back
Luxonis-Lukasz To be sure: with the high speed USB3 cable I don't get that exit status error of course.
Good day All,
My apologies for not checking in and monitoring my thread on this. Sadly, all is still a no-go on my side. I tried to install the latest version (v.3.0.9) using the Windows Setup program and it fails to install. Below is the last few lines showing the error
`Installing collected packages: opencv-python, opencv-contrib-python, depthai, pyqt5, depthai-sdk, argcomplete
Message Box (Error Installing DepthAI Requirements): Couldn't install DepthAI requirements. Check internet connection and try again. Log available at: E:\Software\DepthAI\depthai\launcher\log.dat
Install dependencies call failed with return code: 1, message: WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
ERROR: Could not install packages due to an OSError: [WinError 5] Access is denied: 'E:\Software\DepthAI\venv\Lib\site-packages\PyQt5\QtCore.pyd'
Check the permissions.
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
WARNING: Ignoring invalid distribution -yqt5 (e:\software\depthai\venv\lib\site-packages)
Traceback (most recent call last):
File "E:\Software\DepthAI\depthai\install_requirements.py", line 47, in <module>
subprocess.check_call(pip_package_install + ["-r", "requirements.txt"], cwd=scriptDirectory)
File "E:\Software\DepthAI\WPy64-3950\python-3.9.5.amd64\lib\subprocess.py", line 373, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['E:\Software\DepthAI\venv\Scripts\python.exe', '-m', 'pip', 'install', '-U', '--prefer-binary', '-r', 'requirements.txt']' returned non-zero exit status 1.`
I then uninstalled everything and performed the manual installation via git, etc. All installed, but when I try and run the demo script, I get the same error as before:
E:\Software\depthai>python depthai_demo.py
Using depthai module from: C:\Users\sam\AppData\Roaming\Python\Python39\site-packages\depthai.cp39-win_amd64.pyd
Depthai version installed: 2.14.1.0.dev+27fa4519f289498e84768ab5229a1a45efb7e4df
Setting up demo...
Available devices:
[0] 18443010F158AB1200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for MonoCamera node and left xlink stream...
Creating MJPEG link for MonoCamera node and right xlink stream...
Creating MJPEG link for ColorCamera node and color xlink stream...
Error while running demo script... Command '"C:\Users\sam\AppData\Local\Programs\Python\Python39\python.exe" depthai_demo.py --noSupervisor --guiType qt' returned non-zero exit status 3221226505.
Waiting 5s for the device to be discoverable again...
Setting up demo...
Available devices:
[0] 18443010F158AB1200 [X_LINK_UNBOOTED]
USB Connection speed: UsbSpeed.HIGH
Enabling low-bandwidth mode due to low USB speed... (speed: UsbSpeed.HIGH)
Creating MJPEG link for ColorCamera node and color xlink stream...
Traceback (most recent call last):
File "E:\Software\depthai\depthai_demo.py", line 998, in <module>
s.runDemo(args)
File "E:\Software\depthai\depthai_helpers\supervisor.py", line 46, in runDemo
subprocess.check_call(' '.join([f'"{sys.executable}"', "depthai_demo.py"] + new_args), env=new_env, shell=True, cwd=repo_root)
File "C:\Users\sam\AppData\Local\Programs\Python\Python39\lib\subprocess.py", line 373, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '"C:\Users\sam\AppData\Local\Programs\Python\Python39\python.exe" depthai_demo.py --noSupervisor --guiType cv' returned non-zero exit status 3221226505.
Sentry is attempting to send 2 pending error messages
Waiting up to 2 seconds
Press Ctrl-Break to quit
I never had a chance to try and install on another Win10 machine, but will try to do so over the next few days.
Cheers,
Sam
sam512bb Thanks for reporting both of these!
For the first issue, I'll share it internally and we'll investigate it further.
For the second issue, could you try running the demo either with -usbs usb2
flag or connecting your DepthAI device with a USB3 cable and see if that helps?
Luxonis-Lukasz
Sure, I can do both. Technically I am using a USB3 cable made by Molex...but perhaps there is something not quite right with it. I will buy another USB Cable from a different manufacturer and will give it a try and will report back... in afew days time, as I am a bit swamped these days.
Thanks again for your and everyone's assistance!
Cheers,
Sam
sam512bb Sounds great, hope it works, thanks!
Regarding the first issue - how does your E:/ partition look like, is there anything specific in its configuration? I'd like to reproduce the installation issue so this will be very helpful
- Edited
Luxonis-Lukasz
My setup is nothing overly complicated. I am using Win10 Pro with an SSD for my C Drive that has the usual Windows files, etc and other folders that are used infrequently. The E Drive is a hard drive (1 TB) that I use for frequently used files. I typically install applications on my E Drive in a separate directory (E:\Software). Although I take a performance hit with using a hard drive, I find that hard drives are still far more reliable than SSD drives (I have had only 1 HD failure in 7 years as compared to 3 SSD in just 4 years). However, YMMV. That being said, the E drive has no real special setup parameters.
When I used the Windows Setup program, I downlaoded it and ran it with Administration privilege to ensure it had full control over file/folder creation, etc.
Cheers,
Sam
Thanks a lot, this will be very helpful! I'll try to recreate and circle back if I find the issue. Also, please let me know if using a different partition with installer helps in your case, will allow us to be more confident it's the partition that's causing this issue
erik,
Where is this log located? I looked but cannot find these log files.
I installed DepthAI using the Windows Installer a few days ago. Today, on startup it alerted that there is a new version of depthai available and asked to perform an update. I clicked "Yes".
It gave a list of tasks...was not sure if it did anything.
From then on, the DepthAI demo was BROKEN. I ran it from the command line to see the errors and "depthai" was missing.
Re-installing did not solve the problem. I had to uninstall and then re-install to force all dependencies to be installed.
SpudTheBot If the error won't get fixed, I would suggest cloning the repo from depthai and run the depthai_demo.py via terminal.
Thanks, Erik
Hi,
I just got my D Lite a couple of days ago. I installed DepthAI via the windows installer software. No errors or anything came up. When I click on the DepthAI icon. It comes up and then nothing.. No errors or anything. Any thoughts? THe hardware is plugged in.. Thank you!
Sincerely,
tom