POE Device Ethernet Issue

SamiUddin · Nov 29, 2023

I tried standalone mode. but after that The device is not available through Ethernet connection. I tried to flash with USB many times using device manager and its still not available through Ethernet. Could you please let me know how can I run it normally with Ethernet.
Thanks!

jakaskerl · Nov 29, 2023

Hi SamiUddin
If you were flashing with usb, perhaps you accidentally flashed the USB bootloader instead of the ETH one.
source - https://docs.luxonis.com/projects/api/en/latest/components/bootloader/#danger-zone

SamiUddin · Nov 29, 2023

I even tried with ETH, Could you please send a screen shoot for the better understanding of device_manager.py .

jakaskerl · Nov 29, 2023

Hi SamiUddin
Boot with USB (hold rst button and plug in the usbC) --> Device_manager.py --> select your device --> danger zone --> Factory reset --> NETWORK bootloader (instead of auto).

Thanks,
Jaka

SamiUddin · Nov 29, 2023

Still same error. Even green light of POE is blinking:

SamiUddin · Nov 29, 2023

I am using POE Injector of LUXONIS

jakaskerl · Nov 29, 2023

Hi SamiUddin
What is the injector connected to? Could you try to connect it to a router, see if it recognizes it? Perhaps the device is outside your subnet which would not work with autodiscovery?
https://docs.luxonis.com/projects/hardware/en/latest/pages/guides/getting-started-with-poe/#no-depthai-devices-found

Thanks,
Jaka

SamiUddin · Nov 29, 2023

OK I will check and Back to you soon.