• Hardware

  • Possibe Device Error/MisConfiguration, Power consumption issue

Hi erik

I need the same code to work on Oak-D Lite camera. How can I achieve that?

The Oak-D camera works with an external power supply and USB cable, but the Oak-D Lite camera does not have the socket for an external power supply.

    Also, I found that the OAK-D Lite and OAK-D cameras are always recognized as USB2 device even I use the blue USB3 cable comes with the OAK-D camera.

    How can we solve this issue?

    • erik replied to this.
      5 days later

      franva Use Y-adapter. For USB2 - is that just for the discovery (before booting), or after booting as well?

        @erik yep, after looking around, I found the Y adapter might be the thing to solve the issue.

        For USB 2, I do not know the OAK-D Lite camera has booting. I thought the booting is only for POE model?

        But mine is not POE model.

        What does Discovery here mean?

        How to find out whether it is the discovery or booting?

        • erik replied to this.

          @erik

          Here it is:

          [ 270.646853] usb 1-1.2: USB disconnect, device number 8
          [ 271.418559] usb 1-1.2: new high-speed USB device number 9 using xhci_hcd
          [ 271.519513] usb 1-1.2: New USB device found, idVendor=03e7, idProduct=f63b, bcdDevice= 1.00
          [ 271.519534] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
          [ 271.519542] usb 1-1.2: Product: Luxonis Device
          [ 271.519548] usb 1-1.2: Manufacturer: Intel Corporation
          [ 271.519554] usb 1-1.2: SerialNumber: 18443010F1F1071300

            Hi franva,

            could you please check the USB speed after booting with device.getUsbSpeed() to make sure?

            Thanks,
            Jaka

                jakaskerl thanks Jaka, I'll add the code.

                so what is the return value for USB3 and USB2?

                  Hi jakaskerl

                  Here is the value from dmesg

                  And the value from device.getUsbSpeed() UsbSpeed.SUPER

                  Then I am confused, why from the dmesg ,

                  [ 6652.012692] usb 1-1.1: new high-speed USB device

                  It shows high-speed(USB2) first then shows the SuperSpeed(USB3)?

                  Why is it like this?

                  • erik replied to this.

                      franva initially, it's USB2 when device is waiting for a connection/pipeline. When you connect to the device, depthai uploads the depthai firmware to it, which will try to enable USB3 speeds.

                      Thanks, Erik

                        okiee, thanks for letting know.

                        This question can be closed now.

                        How can I mark it as resolved?