Trying to run the dynamic calibration pipeline for OAK D lite but it doesn't work, get the following error in the log.
00:34:10 ERROR Camera(0):Not possible to create warp params. Error: WARP_SWCH_ERR_CACHE_TO_SMALL
00:34:10 WARN DepthAI errors encountered. Errors: ['Camera(0):Not possible to create warp params. Error: WARP_SWCH_ERR_CACHE_TO_SMALL \n']. Reverting pipeline.
00:34:10 WARN No previous configuration to revert to was found. Attempting to stop the pipeline.
00:34:10 DEBUG Attempting to stop pipeline on device 1.9.
00:34:11 DEBUG Starting the wait for pipeline finish.
00:34:11 DEBUG Waiting for pipeline done.
00:34:11 DEBUG Setting pipeline to None.
00:34:11 WARN Pipeline stopped.
00:34:11 DEBUG Setting device alive state to False due to error.
00:34:11 ERROR Device start failed.
00:34:11 DEBUG Pipeline start error: PipelineStartError: DepthAI errors occurred. Provided configuration cannot be applied. No previous configuration to revert to was found. Pipeline was stopped.
00:34:11 ERROR The device will be disconnected.
00:34:11 DEBUG Pipeline failed to start with the config provider. Attempt to start pipeline with the old one will be made.
00:34:11 INFO Attempting to obtain the device after configuration restart.
00:34:15 DEBUG Available device sockets: [<CameraBoardSocket.CAM_A: 0>, <CameraBoardSocket.CAM_B: 1>, <CameraBoardSocket.CAM_C: 2>]
00:34:15 ERROR system:No IR drivers were detected!
00:34:15 DEBUG Filtering 5 neural networks for platform RVC2
00:34:15 DEBUG Model luxonis/yolov6-nano:r2-coco-512x288 is supported on RVC2
00:34:15 DEBUG Model luxonis/midas-v2-1:small-512x384 is supported on RVC2
00:34:15 DEBUG Model luxonis/yunet:640x480 is supported on RVC2
00:34:15 DEBUG Model luxonis/yolov8-nano-pose-estimation:coco-512x288 is supported on RVC2
00:34:15 DEBUG Model luxonis/yolo-world-l:640x640-host-decoding is NOT supported on RVC2 - filtered out
00:34:15 DEBUG Platform filtering complete. 4/5 models supported on RVC2
00:34:15 DEBUG Attempting to build pipeline with config: PipelineConfig(video_streams={<CameraBoardSocket.CAM_A: 0>: DefaultCameraSettings(socket=<CameraBoardSocket.CAM_A: 0>, fps=15, resolution=Resolution(width=1024, height=576), opened=False, type=<Type.NV12: 22>), <CameraBoardSocket.CAM_B: 1>: DefaultCameraSettings(socket=<CameraBoardSocket.CAM_B: 1>, fps=15, resolution=Resolution(width=640, height=400), opened=False, type=<Type.NV12: 22>), <CameraBoardSocket.CAM_C: 2>: DefaultCameraSettings(socket=<CameraBoardSocket.CAM_C: 2>, fps=15, resolution=Resolution(width=640, height=400), opened=False, type=<Type.NV12: 22>)}, nn_config=PipelineConfig._NNConfig(model=None, input_socket=<CameraBoardSocket.CAM_A: 0>), depth_enabled=True, pointcloud
