jakaskerl HaseenaS Which device info are you specifying? Are you doing it dynamically (using getAllAvailableDevices()) or statically using MXID/IP? Thanks, Jaka
jakaskerl HaseenaS Update the bootloader to improve stability. The code will not need to be changed. > HaseenaS I have assigned Static IP for the camera Use getAllAvailableDevices() as in here import depthai for device in depthai.Device.getAllAvailableDevices(): print(f"{device.getMxId()} {device.state}") Thanks, Jaka
HaseenaS Is the issue of the camera stopping is because bootloader is outdated(0.0.22). if i update the bootloader, will this issue be resolved. i have written code which is running well in my camera, apart from camera automatically stops there is no other issue. but, if i update to latest bootloader will the code get affected? clarify? @jakaskerl @erik
HaseenaS yes i can list all the cameras. there is no reason that a camera will shut down. i have to rerun the code everytime manually to get it started
erik @HaseenaS it's a bootloader issue - in some cases (abrupt disconnection), old bootloader got into a state where it didn't boot the FW back up correctly, and the only possible solution was to power cycle the device. Newer bootloader (0.26 and later) fixed this issue.
jakaskerl HaseenaS Not likely. Your data is probably not stored on the device and even if, it's most likely in EMMC not flash. Anyhow the update should not overwrite existing data (only the bootloader part). Thanks, Jaka
HaseenaS I have assigned static ip for my camera. if i try bootloading, i dont get the device list when i search it or use ip address instead.. can you help with this. @erik @jakaskerl
HaseenaS I am getting the following error: Exception in E:\depthai-python\utilities\device_manager.py, line 385; Failed to find device after booting, error message: X_LINK_DEVICE_NOT_FOUND
jakaskerl HaseenaS So your device is found first, then when trying to boot the device it becomes unavailable. This points to a POE power issue or some TCP block. What is the IP of your host machine and IP you have assigned to the device? Thanks, Jaka
HaseenaS As per your suggestion i performed bootloading with latest version 0.26. but still the camera stops while running. camera encountered an error, could not find any device with given device info. What is the solution to camera shutdown issue? @erik @jakaskerl