• RAE
  • Wifi Module Missing After Upgrade Firmware to v1.14

After running mender upgrade, the wifi module went missing. How do I downgrade the firmware without internet?

root@rae:~# wpa_supplicant -B -i wlp1s0 -c /etc/wpa_supplicant.conf
Successfully initialized wpa_supplicant
Could not read interface wlp1s0 flags: No such device
nl80211: Driver does not support authentication/association or connect commands
nl80211: deinit ifname=wlp1s0 disabled_11b_rates=0
Could not read interface wlp1s0 flags: No such device
wlp1s0: Failed to initialize driver interface
root@rae:~# ifconfig
br0       Link encap:Ethernet  HWaddr FA:C1:F2:D8:BC:B2  
          inet addr:192.168.197.55  Bcast:192.168.197.63  Mask:255.255.255.240
          inet6 addr: fe80::f8c1:f2ff:fed8:bcb2/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1070 errors:0 dropped:0 overruns:0 frame:0
          TX packets:822 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:117932 (115.1 KiB)  TX bytes:181002 (176.7 KiB)

docker0   Link encap:Ethernet  HWaddr 02:42:B6:53:4E:18  
          inet addr:172.17.0.1  Bcast:172.17.255.255  Mask:255.255.0.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:978836 errors:0 dropped:0 overruns:0 frame:0
          TX packets:978836 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:9567340086 (8.9 GiB)  TX bytes:9567340086 (8.9 GiB)

usb0      Link encap:Ethernet  HWaddr EA:6C:F1:37:10:33  
          inet6 addr: fe80::e86c:f1ff:fe37:1033/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1076 errors:0 dropped:0 overruns:0 frame:0
          TX packets:779 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:118764 (115.9 KiB)  TX bytes:206180 (201.3 KiB)

usb1      Link encap:Ethernet  HWaddr B2:7A:D8:F2:2D:FD  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@rae:~# 

Hi @SamChoy
Weird. Could you paste the outputs of:

lspci
dmesg
cat /etc/os-release
fip-version

and the output of dmesg including all boot sequence.

Thanks,
Jaka

I tried to downgrade it to firmware v1.12, same thing happened

lspci

root@keembay:~# lspci
root@keembay:~# 

dmesg

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.32-intel-standard (oe-user@oe-host) (aarch64-ese-linux-gcc (GCC) 9.2.1 20191025, GNU ld (GNU Binutils) 2.34.0.20200220) #1 SMP PREEMPT Fri Aug 11 20:14:36 UTC 2023
[    0.000000] Machine model: rae
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000020180000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000084800000, size 256 MiB
[    0.000000] OF: reserved mem: initialized node vpu_reserved@84800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000094800000, size 2 MiB
[    0.000000] OF: reserved mem: initialized node ipc_buffers@94800000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000094a00000, size 2 MiB
[    0.000000] OF: reserved mem: initialized node ipc_buffers@94A00000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000094c00000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node xlink_buffers@94C00000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000094d00000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node xlink_buffers@94D00000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created CMA memory pool at 0x000000009d000000, size 1328 MiB
[    0.000000] OF: reserved mem: initialized node pixel_data_cma@0x9d000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000480000000, size 768 MiB
[    0.000000] OF: reserved mem: initialized node codec_reserved@480000000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000084800000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000004ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000084800000-0x0000000094dfffff]
[    0.000000]   node   0: [mem 0x0000000094e00000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000480000000-0x00000004afffffff]
[    0.000000]   node   0: [mem 0x00000004b0000000-0x00000004ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000084800000-0x00000004ffffffff]
[    0.000000] On node 0 totalpages: 1030144
[    0.000000]   DMA zone: 7904 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 505856 pages, LIFO batch:63
[    0.000000]   Normal zone: 8192 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 23 pages/cpu s54744 r8192 d31272 u94208
[    0.000000] pcpu-alloc: s54744 r8192 d31272 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1014048
[    0.000000] Kernel command line: root=/dev/mmcblk1p8 rootwait rw mender.data=/dev/mmcblk1p11 earlycon=uart8250,mmio32,0x20180000 verity=0
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
[    0.000000] Memory: 1437824K/4120576K available (11008K kernel code, 1258K rwdata, 4532K rodata, 73792K init, 431K bss, 1290112K reserved, 1392640K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x2c/0x410 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: 128 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000020580000
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
[    0.000000] arch_timer: Keembay applied clocksource workaround
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.008154] Failed to initialize '/soc/counter@203300e8': -6
[    0.014014] Console: colour dummy device 80x25
[    0.018455] printk: console [tty0] enabled
[    0.022552] printk: bootconsole [uart8250] disabled
[    0.027450] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.027468] pid_max: default: 32768 minimum: 301
[    0.027575] LSM: Security Framework initializing
[    0.027665] AppArmor: AppArmor initialized
[    0.027719] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.027741] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.029016] rcu: Hierarchical SRCU implementation.
[    0.030025] EFI services will not be available.
[    0.030180] smp: Bringing up secondary CPUs ...
[    0.030540] Detected VIPT I-cache on CPU1
[    0.030566] GICv3: CPU1: found redistributor 1 region 0:0x00000000205a0000
[    0.030602] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.030979] Detected VIPT I-cache on CPU2
[    0.030991] GICv3: CPU2: found redistributor 2 region 0:0x00000000205c0000
[    0.031008] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.031344] Detected VIPT I-cache on CPU3
[    0.031356] GICv3: CPU3: found redistributor 3 region 0:0x00000000205e0000
[    0.031372] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.031421] smp: Brought up 1 node, 4 CPUs
[    0.031512] SMP: Total of 4 processors activated.
[    0.031525] CPU features: detected: 32-bit EL0 Support
[    0.031535] CPU features: detected: CRC32 instructions
[    0.031545] CPU features: detected: 32-bit EL1 Support
[    0.031607] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.041378] CPU: All CPU(s) started at EL1
[    0.041404] alternatives: patching kernel code
[    0.042235] devtmpfs: initialized
[    0.046787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.046811] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.083076] pinctrl core: initialized pinctrl subsystem
[    0.083569] DMI not present or invalid.
[    0.084029] NET: Registered protocol family 16
[    0.085131] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[    0.085228] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.085412] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.085448] audit: initializing netlink subsys (disabled)
[    0.085614] audit: type=2000 audit(0.072:1): state=initialized audit_enabled=0 res=1
[    0.085923] thermal_sys: Registered thermal governor 'fair_share'
[    0.085926] thermal_sys: Registered thermal governor 'step_wise'
[    0.085938] thermal_sys: Registered thermal governor 'user_space'
[    0.086535] cpuidle: using governor ladder
[    0.086631] cpuidle: using governor menu
[    0.086763] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.086835] ASID allocator initialised with 65536 entries
[    0.094730] OF: /soc/gpio@20320000: could not find phandle
[    0.096761] OF: /soc/gpio@20320000: could not find phandle
[    0.103110] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.103124] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.103135] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.103146] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.104078] cryptd: max_cpu_qlen set to 1000
[    0.105995] iommu: Default domain type: Translated 
[    0.106141] vgaarb: loaded
[    0.106379] SCSI subsystem initialized
[    0.106536] usbcore: registered new interface driver usbfs
[    0.106572] usbcore: registered new interface driver hub
[    0.106600] usbcore: registered new device driver usb
[    0.107121] pps_core: LinuxPPS API ver. 1 registered
[    0.107132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.107152] PTP clock support registered
[    0.107252] EDAC MC: Ver: 3.0.0
[    0.107621] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    0.107671] arm-scmi firmware:scmi: SCMI Protocol v1.0 'INTEL:KMB' Firmware version 0x1
[    0.107721] arm-scmi firmware:scmi: SCMI protocol 17 not implemented
[    0.108074] Advanced Linux Sound Architecture Driver Initialized.
[    0.108439] NetLabel: Initializing
[    0.108448] NetLabel:  domain hash size = 128
[    0.108457] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.108522] NetLabel:  unlabeled traffic allowed by default
[    0.108756] clocksource: Switched to clocksource arch_sys_counter
[    0.108888] VFS: Disk quotas dquot_6.6.0
[    0.108934] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.109379] AppArmor: AppArmor Filesystem Enabled
[    0.113659] NET: Registered protocol family 2
[    0.114105] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.114155] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.114345] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[    0.114891] TCP: Hash tables configured (established 32768 bind 32768)
[    0.114985] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.115058] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[    0.115223] NET: Registered protocol family 1
[    0.115253] PCI: CLS 0 bytes, default 64
[    0.248355] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.248715] kvm [1]: HYP mode not available
[    0.249886] Initialise system trusted keyrings
[    0.249980] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[    0.254906] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.285952] NET: Registered protocol family 38
[    0.285969] Key type asymmetric registered
[    0.285979] Asymmetric key parser 'x509' registered
[    0.286011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.286099] io scheduler mq-deadline registered
[    0.286110] io scheduler kyber registered
[    0.286929] debugfs: Directory '20400000.usb_phy' with parent 'regmap' already present!
[    0.289464] gpiochip_find_base: found new base at 432
[    0.289503] gpio gpiochip0: (20320000.gpio): created GPIO range 0->79 ==> 20320000.gpio PIN 0->79
[    0.289634] gpio gpiochip0: (20320000.gpio): added GPIO chardev (254:0)
[    0.289680] gpio gpiochip0: registered GPIOs 432 to 511 on 20320000.gpio
[    0.290632] keembay-pcie 37000000.pcie: GPIO lookup for consumer reset
[    0.290637] keembay-pcie 37000000.pcie: using device tree for GPIO lookup
[    0.290653] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/pcie@37000000[0]'
[    0.290673] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/soc/pcie@37000000[0]' - status (0)
[    0.294491] dw_axi_dmac_platform 28000000.dma: DesignWare AXI DMA Controller, 8 channels
[    0.295417]  203300f0.ipc:local_rsvd_mem: assigned reserved memory node ipc_buffers@94A00000
[    0.295747]  203300f0.ipc:remote_rsvd_mem: assigned reserved memory node ipc_buffers@94800000
[    0.296036] keembay-ipc 203300f0.ipc: Local vaddr 0x(____ptrval____) vpu_addr 0x0000000094a00000 size 0x200000
[    0.296052] keembay-ipc 203300f0.ipc: Remote vaddr 0x(____ptrval____) vpu_addr 0x0000000094800000 size 0x200000
[    0.296328] keembay-ipc 203300f0.ipc: IPC Buffer Pool size: 32768
[    0.300255] keembay-ipc 203300f0.ipc: Register base for css_fifo: vaddr (____ptrval____) paddr: 0x00000000203300f0
[    0.300306] keembay-ipc 203300f0.ipc: Register base for mss_fifo: vaddr (____ptrval____) paddr: 0x00000000208200f0
[    0.300353] keembay-ipc 203300f0.ipc: Registering handler for IRQ 35
[    0.303248] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.304230] dw-apb-uart 20150000.serial: GPIO lookup for consumer rs485-term
[    0.304235] dw-apb-uart 20150000.serial: using device tree for GPIO lookup
[    0.304253] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@20150000[0]'
[    0.304266] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@20150000[0]'
[    0.304274] dw-apb-uart 20150000.serial: using lookup tables for GPIO lookup
[    0.304280] dw-apb-uart 20150000.serial: No GPIO consumer rs485-term found
[    0.304303] 20150000.serial: ttyS0 at MMIO 0x20150000 (irq = 15, base_baud = 2048) is a 16550A
[    0.304689] dw-apb-uart 20160000.serial: GPIO lookup for consumer rs485-term
[    0.304693] dw-apb-uart 20160000.serial: using device tree for GPIO lookup
[    0.304706] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@20160000[0]'
[    0.304718] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@20160000[0]'
[    0.304725] dw-apb-uart 20160000.serial: using lookup tables for GPIO lookup
[    0.304730] dw-apb-uart 20160000.serial: No GPIO consumer rs485-term found
[    0.304759] 20160000.serial: ttyS1 at MMIO 0x20160000 (irq = 16, base_baud = 2048) is a 16550A
[    0.305109] dw-apb-uart 20170000.serial: GPIO lookup for consumer rs485-term
[    0.305114] dw-apb-uart 20170000.serial: using device tree for GPIO lookup
[    0.305126] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@20170000[0]'
[    0.305138] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@20170000[0]'
[    0.305144] dw-apb-uart 20170000.serial: using lookup tables for GPIO lookup
[    0.305149] dw-apb-uart 20170000.serial: No GPIO consumer rs485-term found
[    0.305165] 20170000.serial: ttyS2 at MMIO 0x20170000 (irq = 17, base_baud = 2048) is a 16550A
[    0.305498] dw-apb-uart 20180000.serial: GPIO lookup for consumer rs485-term
[    0.305503] dw-apb-uart 20180000.serial: using device tree for GPIO lookup
[    0.305516] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/soc/serial@20180000[0]'
[    0.305528] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/soc/serial@20180000[0]'
[    0.305534] dw-apb-uart 20180000.serial: using lookup tables for GPIO lookup
[    0.305539] dw-apb-uart 20180000.serial: No GPIO consumer rs485-term found
[    0.305556] 20180000.serial: ttyS3 at MMIO 0x20180000 (irq = 18, base_baud = 1500000) is a 16550A
[    0.305581] dw8250_set_termios_keembay: baud= 115200 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[    1.440744] printk: console [ttyS3] enabled
[    1.446007] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[    1.452564] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.463858] loop: module loaded
[    1.467251] xlink-driver soc:xlink: KeemBay xlink v0.1.3:a
[    1.499198] xlink-driver soc:xlink: Major = 245 Minor = 0
[    1.504836] xlink-driver soc:xlink: Device Driver Insert...Done!!!
[    1.511041] xlink-event kobject added
[    1.515034] keembay-xlink-ipc soc:xlink-ipc: Keem Bay xlink IPC driver probed.
[    1.522275] keembay-xlink-ipc soc:xlink-ipc:  dev_name soc:xlink-ipc, name xlink_local_reserved
[    1.531040]  soc:xlink-ipc:xlink_local_reserved: assigned reserved memory node xlink_buffers@94D00000
[    1.540285] keembay-xlink-ipc soc:xlink-ipc:  dev_name soc:xlink-ipc, name xlink_remote_reserved
[    1.549107]  soc:xlink-ipc:xlink_remote_reserved: assigned reserved memory node xlink_buffers@94C00000
[    1.558690] keembay-xlink-ipc soc:xlink-ipc: Local vaddr 0x(____ptrval____) paddr 0x0x0000000094d00000 size 0x100000
[    1.569209] keembay-xlink-ipc soc:xlink-ipc: Remote vaddr 0x(____ptrval____) paddr 0x0x0000000094c00000 size 0x100000
[    1.579945] keembay-xlink-ipc soc:xlink-ipc: xlink Buffer Pool size: 2000
[    1.586744] keembay-xlink-ipc soc:xlink-ipc: Using IPC device: 3f00209c.vpu-ipc
[    1.594055] keembay-xlink-ipc soc:xlink-ipc: Device id=0 sw_device_id=0x0 name=vpu-slice-0 probe complete.
[    1.604104] thermal thermal_zone0: failed to read out thermal zone (-22)
[    1.610840] thermal thermal_zone1: failed to read out thermal zone (-22)
[    1.617568] thermal thermal_zone2: failed to read out thermal zone (-22)
[    1.624296] thermal thermal_zone3: failed to read out thermal zone (-22)
[    1.631162] intel,keembay_thermal intel,keembay_thermal.0: Thermal driver loaded for intel,keembay_thermal
[    1.640959] vpu_cooling_drv soc:vpu-cooling-device: Get max supported states function called
[    1.649433] vpu_cooling_drv soc:vpu-cooling-device: Get max supported states function called
[    1.657883] vpu_cooling_drv soc:vpu-cooling-device: Get max supported states function called
[    1.666329] vpu_cooling_drv soc:vpu-cooling-device: Get max supported states function called
[    1.674774] vpu_cooling_drv soc:vpu-cooling-device: Get max supported states function called
[    1.683228] vpu_cooling_drv soc:vpu-cooling-device: VPU not started. xlink_get_device_status() returned 0 and xlink_device_status=4294967274
[    1.695831] vpu_cooling_drv soc:vpu-cooling-device: VPU not started. xlink_get_device_status() returned 0 and xlink_device_status=4294967274
[    1.708439] vpu_cooling_drv soc:vpu-cooling-device: VPU cooling device probe success
[    1.716316] intel_hddl_client 20320000.hddl_device: Board type is kmb-dm3370-r5m2
[    1.723809] intel_hddl_client 20320000.hddl_device: This platform does not support soc-reset
[    1.732446] intel_hddl_client 20320000.hddl_device: HDDL:Device name: 0 vpu-slice-0
[    1.733256] dw_spi_mmio 201c2000.spi: Unbalanced pm_runtime_enable!
[    1.746831] dw_spi_mmio 201c4000.spi: Unbalanced pm_runtime_enable!
[    1.753131] spi_master spi2: GPIO lookup for consumer cs
[    1.753135] spi_master spi2: using device tree for GPIO lookup
[    1.753161] of_get_named_gpiod_flags: parsed 'cs-gpios' property of node '/soc/spi@201c4000[0]' - status (0)
[    1.753418] panel-t0d96bp spi2.0: GPIO lookup for consumer reset
[    1.753423] panel-t0d96bp spi2.0: using device tree for GPIO lookup
[    1.753440] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/soc/spi@201c4000/lcd@0[0]' - status (0)
[    1.753452] panel-t0d96bp spi2.0: GPIO lookup for consumer dc
[    1.753456] panel-t0d96bp spi2.0: using device tree for GPIO lookup
[    1.753472] of_get_named_gpiod_flags: parsed 'dc-gpios' property of node '/soc/spi@201c4000/lcd@0[0]' - status (0)
[    1.753482] panel-t0d96bp spi2.0: GPIO lookup for consumer led
[    1.753487] panel-t0d96bp spi2.0: using device tree for GPIO lookup
[    1.753503] of_get_named_gpiod_flags: parsed 'led-gpios' property of node '/soc/spi@201c4000/lcd@0[0]' - status (0)
[    2.418013] random: fast init done
[    2.553417] panel-t0d96bp spi2.0: device init completed
[    2.558645] panel-t0d96bp spi2.0: frame buffer is allocated
[    2.564256] panel-t0d96bp spi2.0: info.fix.smem_start=4126560256
               info.fix.smem_len=38400
               info.screen_size=38400
[    2.577381] Console: switching to colour frame buffer device 20x10
[    2.583589] panel-t0d96bp spi2.0: frame buffer is registered
[    2.589254] panel-t0d96bp spi2.0: spi driver probed
[    2.594348] dw_spi_mmio 201c6000.spi: Unbalanced pm_runtime_enable!
[    2.601591] mdio_bus fixed-0: GPIO lookup for consumer reset
[    2.601596] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    2.601601] mdio_bus fixed-0: No GPIO consumer reset found
[    2.601621] libphy: Fixed MDIO Bus: probed
[    2.606041] tun: Universal TUN/TAP device driver, 1.6
[    2.611327] usbcore: registered new interface driver asix
[    2.616773] usbcore: registered new interface driver ax88179_178a
[    2.622893] usbcore: registered new interface driver cdc_ether
[    2.628757] usbcore: registered new interface driver net1080
[    2.634439] usbcore: registered new interface driver cdc_subset
[    2.640381] usbcore: registered new interface driver zaurus
[    2.645987] usbcore: registered new interface driver cdc_ncm
[    2.651672] usbcore: registered new interface driver qmi_wwan
[    2.657506] VFIO - User Level meta-driver version: 0.3
[    2.724774] OF: graph: no port node found in /soc/usb_phy@20480000
[    2.732726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.739287] ehci-pci: EHCI PCI platform driver
[    2.743758] ehci-platform: EHCI generic platform driver
[    2.749089] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.755280] ohci-pci: OHCI PCI platform driver
[    2.759749] ohci-platform: OHCI generic platform driver
[    2.765277] usbcore: registered new interface driver cdc_wdm
[    2.770969] usbcore: registered new interface driver usb-storage
[    2.777035] usbcore: registered new interface driver option
[    2.782629] usbserial: USB Serial support registered for GSM modem (1-port)
[    2.790683] i2c /dev entries driver
[    2.795202] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[    2.805058] sdhci: Secure Digital Host Controller Interface driver
[    2.811246] sdhci: Copyright(c) Pierre Ossman
[    2.815682] Synopsys Designware Multimedia Card Interface Driver
[    2.821946] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.828117] sdhci-arasan 33000000.mmc: GPIO lookup for consumer wp
[    2.828122] sdhci-arasan 33000000.mmc: using device tree for GPIO lookup
[    2.828139] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@33000000[0]'
[    2.828152] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@33000000[0]'
[    2.828160] sdhci-arasan 33000000.mmc: using lookup tables for GPIO lookup
[    2.828166] sdhci-arasan 33000000.mmc: No GPIO consumer wp found
[    2.828338] mmc1: CQHCI version 5.10
[    2.831971] ledtrig-cpu: registered to indicate activity on CPUs
[    2.838198] keembay-vpu-ipc 3f00209c.vpu-ipc: Keem Bay VPU IPC probing.
[    2.845022] hid: raw HID events driver (C) Jiri Kosina
[    2.850548] usbcore: registered new interface driver usbhid
[    2.856130] usbhid: USB HID core driver
[    2.857470] mmc1: SDHCI controller on 33000000.mmc [33000000.mmc] using ADMA
[    2.860449] optee: probing for conduit method.
[    2.871483] optee: revision 3.14 (d21befa5)
[    2.871644] optee: dynamic shared memory is enabled
[    2.881037] optee: initialized driver
[    2.886095] IPVS: Registered protocols (TCP, UDP)
[    2.890911] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    2.898349] IPVS: ipvs loaded.
[    2.901418] IPVS: [rr] scheduler registered.
[    2.905800] Initializing XFRM netlink socket
[    2.910185] NET: Registered protocol family 17
[    2.914712] 9pnet: Installing 9P2000 support
[    2.919032] Key type dns_resolver registered
[    2.923536] registered taskstats version 1
[    2.927644] Loading compiled-in X.509 certificates
[    2.932589] AppArmor: AppArmor sha1 policy hashing enabled
[    2.938293] mmc1: Command Queue Engine enabled
[    2.942790] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    2.944498] i2c_designware 20200000.i2c: GPIO lookup for consumer scl
[    2.949160] i2c_designware 20200000.i2c: using device tree for GPIO lookup
[    2.949183] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@20200000[0]'
[    2.949195] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/soc/i2c@20200000[0]'
[    2.949203] i2c_designware 20200000.i2c: using lookup tables for GPIO lookup
[    2.949209] i2c_designware 20200000.i2c: No GPIO consumer scl found
[    2.949628] at24 0-0051: supply vcc not found, using dummy regulator
[    2.949664] mmcblk1: mmc1:0001 DF4032 29.1 GiB 
[    2.956083] at24 0-0051: GPIO lookup for consumer wp
[    2.960540] at24 0-0051: using device tree for GPIO lookup
[    2.960557] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/i2c@20200000/eeprom@51[0]'
[    2.960570] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/i2c@20200000/eeprom@51[0]'
[    2.960577] at24 0-0051: using lookup tables for GPIO lookup
[    2.960582] at24 0-0051: No GPIO consumer wp found
[    2.960668] mmcblk1boot0: mmc1:0001 DF4032 partition 1 4.00 MiB
[    2.960806] at24 0-0051: 4096 byte 24c32 EEPROM, writable, 1 bytes/write
[    2.966727] mmcblk1boot1: mmc1:0001 DF4032 partition 2 4.00 MiB
[    2.973560] i2c_designware 20210000.i2c: GPIO lookup for consumer scl
[    2.979220] i2c_designware 20210000.i2c: using device tree for GPIO lookup
[    2.979234] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@20210000[0]'
[    2.979246] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/soc/i2c@20210000[0]'
[    2.979252] i2c_designware 20210000.i2c: using lookup tables for GPIO lookup
[    2.979256] i2c_designware 20210000.i2c: No GPIO consumer scl found
[    2.979298] mmcblk1rpmb: mmc1:0001 DF4032 partition 3 4.00 MiB, chardev (242:0)
[    2.979549] i2c_designware 20220000.i2c: GPIO lookup for consumer scl
[    2.986619] i2c_designware 20220000.i2c: using device tree for GPIO lookup
[    2.986633] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@20220000[0]'
[    2.986645] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/soc/i2c@20220000[0]'
[    2.986651] i2c_designware 20220000.i2c: using lookup tables for GPIO lookup
[    2.986656] i2c_designware 20220000.i2c: No GPIO consumer scl found
[    2.986977] i2c_designware 20230000.i2c: GPIO lookup for consumer scl
[    2.986982] i2c_designware 20230000.i2c: using device tree for GPIO lookup
[    2.986995] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@20230000[0]'
[    2.987007] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/soc/i2c@20230000[0]'
[    2.987014] i2c_designware 20230000.i2c: using lookup tables for GPIO lookup
[    2.987018] i2c_designware 20230000.i2c: No GPIO consumer scl found
[    2.987498] i2c_designware 20240000.i2c: GPIO lookup for consumer scl
[    2.987503] i2c_designware 20240000.i2c: using device tree for GPIO lookup
[    2.987520] of_get_named_gpiod_flags: can't parse 'scl-gpios' property of node '/soc/i2c@20240000[0]'
[    2.987532] of_get_named_gpiod_flags: can't parse 'scl-gpio' property of node '/soc/i2c@20240000[0]'
[    2.987538] i2c_designware 20240000.i2c: using lookup tables for GPIO lookup
[    2.987542] i2c_designware 20240000.i2c: No GPIO consumer scl found
[    2.987946] keembay-pcie 37000000.pcie: GPIO lookup for consumer reset
[    2.987951] keembay-pcie 37000000.pcie: using device tree for GPIO lookup
[    2.987964] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/soc/pcie@37000000[0]'
[    2.987987] of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/soc/pcie@37000000[0]' - status (0)
[    2.992553]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
[    3.094395] keembay-pcie 37000000.pcie: host bridge /soc/pcie@37000000 ranges:
[    3.101640] keembay-pcie 37000000.pcie:   No bus range found for /soc/pcie@37000000, using [bus 00-ff]
[    3.110970] keembay-pcie 37000000.pcie:      MEM 0x0036000000..0x0036dfffff -> 0x0036000000
[    3.119381] keembay-pcie 37000000.pcie: invalid resource
[    4.124809] keembay-pcie 37000000.pcie: Phy link never came up
[    4.132168] keembay-pcie 37000000.pcie: Failed to initialize host: -110
[    4.138874] keembay-pcie: probe of 37000000.pcie failed with error -110
[    4.145996] keembay-vpu-ipc 3f00209c.vpu-ipc: Keem Bay VPU IPC probing.
[    4.155676] keembay-vpu-ipc 3f00209c.vpu-ipc: Using IPC device: 203300f0.ipc
[    4.162778] keembay-vpu-ipc 3f00209c.vpu-ipc: Memory region (X509) paddr 0x0x0000000084100000 size 0x100000
[    4.172538] keembay-vpu-ipc 3f00209c.vpu-ipc: Memory region (MSS IPC) vpu_addr 0x0000000094800000 paddr 0x0000000094800000 size 0x200000
[    4.184831] keembay-vpu-ipc 3f00209c.vpu-ipc: assigned reserved memory node vpu_reserved@84800000
[    4.227340] keembay-vpu-ipc 3f00209c.vpu-ipc: Memory region (firmware): vpu_addr 0x0x0000000084800000 size 0x10000000
[    4.237964] keembay-vpu-ipc 3f00209c.vpu-ipc: Register base for nce_wdt: 0x0x000000003f00209c
[    4.246500] keembay-vpu-ipc 3f00209c.vpu-ipc: Register base for nce_tim_cfg: 0x0x000000003f003008
[    4.255387] keembay-vpu-ipc 3f00209c.vpu-ipc: Register base for mss_wdt: 0x0x000000002082009c
[    4.263923] keembay-vpu-ipc 3f00209c.vpu-ipc: Register base for mss_tim_cfg: 0x0x0000000020821008
[    4.272871] keembay-vpu-ipc 3f00209c.vpu-ipc: Keem Bay VPU IPC probed.
[    4.280457] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/keembay_keys/power-button[0]'
[    4.280470] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/keembay_keys/power-button[0]'
[    4.280513] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/keembay_keys/usb-interrupt[0]'
[    4.280525] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/keembay_keys/usb-interrupt[0]'
[    4.280555] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/keembay_keys/reset-button[0]'
[    4.280566] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/keembay_keys/reset-button[0]'
[    4.280688] input: keembay_keys as /devices/platform/keembay_keys/input/input0
[    4.288578] ALSA device list:
[    4.291557]   No soundcards found.
[    4.295178] dw-apb-uart 20180000.serial: forbid DMA for kernel console
[    4.301732] dw8250_set_termios_keembay: baud= 115200 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[    4.338760] Freeing unused kernel memory: 73792K
[    4.384101] Checked W+X mappings: passed, no W+X pages found
[    4.389826] Run /init as init process
[    4.393501]   with arguments:
[    4.393505]     /init
[    4.393508]   with environment:
[    4.393512]     HOME=/
[    4.393515]     TERM=linux
[    4.393518]     verity=0
[    4.832326] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null)
[    5.023307] [initrd] waiting for /dev/mmcblk1p11
[    5.139098] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: (null)
[    5.176632] [initrd] data done
[    5.197448] [initrd] rbind done
[    5.212844] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: (null)
[    5.251362] [initrd] rbind persistent done
[    5.266667] [initrd] rbind apparmor done
[    5.608921] [initrd] rbind vpux firmware done
[    5.866295] systemd[1]: System time before build time, advancing clock.
[    5.894414] NET: Registered protocol family 10
[    5.899593] Segment Routing with IPv6
[    5.915858] systemd[1]: systemd 244.5+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    5.938080] systemd[1]: Detected architecture arm64.
[    5.973313] systemd[1]: Set hostname to <keembay>.
[    6.194374] systemd[1]: /lib/systemd/system/docker.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock \xe2\x86\x92 /run/docker.sock; please update the unit file accordingly.
[    6.219884] systemd[1]: /lib/systemd/system/deviceservice.service:9: Ignoring unknown escape sequences: "/bin/echo $VPU_FIRMWARE_FILE > /sys/devices/platform/soc/soc\:vpusmm/fwname"
[    6.327974] systemd[1]: data.mount: Unit is bound to inactive unit dev-mmcblk1p11.device. Stopping, too.
[    6.337578] systemd[1]: Requested transaction contradicts existing jobs: Transaction for data.mount/stop is destructive (mender-systemd-growfs-data.service has 'start' job queued, but 'stop' is included in transaction).
[    6.357057] systemd[1]: data.mount: Failed to enqueue stop job, ignoring: Transaction for data.mount/stop is destructive (mender-systemd-growfs-data.service has 'start' job queued, but 'stop' is included in transaction).
[    6.376633] systemd[1]: Condition check resulted in System Slice being skipped.
[    6.386424] systemd[1]: Unnecessary job for /dev/mmcblk1p11 was removed.
[    6.393177] systemd[1]: Unnecessary job for /dev/mmcblk1p10 was removed.
[    6.401264] random: systemd: uninitialized urandom read (16 bytes read)
[    6.408083] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    6.420438] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    6.431667] systemd[1]: Created slice system-getty.slice.
[    6.452871] random: systemd: uninitialized urandom read (16 bytes read)
[    6.460591] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.480840] random: systemd: uninitialized urandom read (16 bytes read)
[    6.488472] systemd[1]: Created slice User and Session Slice.
[    6.509035] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.532938] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.556919] systemd[1]: Reached target Local Encrypted Volumes.
[    6.576912] systemd[1]: Reached target Paths.
[    6.596841] systemd[1]: Reached target Remote Encrypted Volumes.
[    6.616829] systemd[1]: Reached target Remote File Systems.
[    6.636830] systemd[1]: Reached target Slices.
[    6.656838] systemd[1]: Reached target Swap.
[    6.677332] systemd[1]: Listening on Syslog Socket.
[    6.697000] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    6.721269] systemd[1]: Listening on Journal Audit Socket.
[    6.741038] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.761114] systemd[1]: Listening on Journal Socket.
[    6.781193] systemd[1]: Listening on Network Service Netlink Socket.
[    6.805075] systemd[1]: Listening on udev Control Socket.
[    6.825001] systemd[1]: Listening on udev Kernel Socket.
[    6.848482] systemd[1]: Mounting Huge Pages File System...
[    6.872461] systemd[1]: Mounting POSIX Message Queue File System...
[    6.900493] systemd[1]: Mounting Kernel Debug File System...
[    6.922808] systemd[1]: Mounting Temporary Directory (/tmp)...
[    6.944271] systemd[1]: Started RAE charger setup.
[    6.964904] systemd[1]: Started Event watch.
[    6.986254] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    7.012211] systemd[1]: Started LCD logo.
[    7.028932] systemd[1]: Starting Mender service to grow data partition size...
[    7.058563] systemd[1]: Starting Journal Service...
[    7.081226] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.109094] systemd[1]: Starting udev Coldplug all Devices...
[    7.139706] systemd[1]: Started TEE Supplicant.
[    7.148822] EXT4-fs (mmcblk1p8): re-mounted. Opts: (null)
[    7.160805] systemd[1]: Started Secure WatchDog Timer.
[    7.192619] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    7.201367] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    7.214143] systemd[1]: Mounting Kernel Configuration File System...
[    7.240564] systemd[1]: Starting Apply Kernel Variables...
[    7.269492] systemd[1]: Started Journal Service.
[    7.484117] EXT4-fs (mmcblk1p11): resizing filesystem from 23357423 to 23357423 blocks
[    7.497520] systemd-journald[375]: Received client request to flush runtime journal.
[    7.899276] random: crng init done
[    7.902761] random: 7 urandom warning(s) missed due to ratelimiting
[    7.915907] mc: Linux media interface: v0.10
[    7.930114] videodev: Linux video capture interface: v2.00
[    7.968803] kmb-ov9282-sensor left: read rotation variable: 180
[    7.968832] kmb-imx214-sensor color: IMX214 rotate180 enabled
[    7.974804] kmb-ov9282-sensor left: read sensor-type variable: color
[    7.983530] kmb-imx214-sensor color: pre detect gpios
[    7.991774] kmb-ov9282-sensor left: read aux-force variable: 0
[    7.993607] kmb-imx214-sensor color: detected gpio
[    7.998031] kmb-ov9282-sensor left: OV9282 color mode selected by default
[    8.004574] kmb-imx214-sensor color: got inclk
[    8.017669] kmb-imx214-sensor color: set inclk to 24000000 Hz
[    8.022413] kmb-ov9282-sensor left: GPIO lookup for consumer reset
[    8.028614] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
[    8.028635] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
[    8.031920] kmb-imx214-sensor color: GPIO lookup for consumer reset
[    8.031932] kmb-imx214-sensor color: using device tree for GPIO lookup
[    8.031976] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/color[0]' - status (0)
[    8.033089] keembay-vpu-mgr soc:vpusmm: assigned reserved memory node pixel_data_cma@0x9d000000
[    8.033215] kmb-ov9282-sensor left: using device tree for GPIO lookup
[    8.042326] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/left[0]' - status (0)
[    8.062105] kmb-ov9282-sensor left: read chip id, ret: 0
[    8.068463] kmb-imx214-sensor color: powered on the sensor
[    8.074136] kmb-ov9282-sensor left: found expected chip id: 9281
[    8.074728] dev 0x0 connected - dev_type 1 - nmb_connected_links 1
[    8.082277] kmb-ov9282-sensor left: Probe success!
[    8.092862] kmb-imx214-sensor color: Detected on i2c address 10
[    8.099094] kmb-imx214-sensor color: got i2c client
[    8.101074] kmb-ov9282-sensor right: read rotation variable: 0
[    8.106076] kmb-imx214-sensor color: about to read chip id... reg: 16
[    8.117423] kmb-ov9282-sensor right: read sensor-type variable: color
[    8.118031] kmb-imx214-sensor color: read chip id, ret: 0
[    8.123980] kmb-ov9282-sensor right: read aux-force variable: 0
[    8.129596] keembay-vpu-mgr soc:vpusmm: vcm_vpu_link_init: rc = 0
[    8.131427] kmb-imx214-sensor color: found expected chip id: 214
[    8.131431] kmb-imx214-sensor color: detected imx214 successfully
[    8.131435] kmb-imx214-sensor color: detected imx214 successfully
[    8.131509] kmb-imx214-sensor color: initialized controls
[    8.131604] kmb-imx214-sensor color: Probe success!
[    8.137714] kmb-ov9282-sensor right: OV9282 color mode selected by default
[    8.177697] kmb-ov9282-sensor right: GPIO lookup for consumer reset
[    8.177705] kmb-ov9282-sensor right: using device tree for GPIO lookup
[    8.177743] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/right[0]' - status (0)
[    8.197714] kmb-ov9282-sensor right: read chip id, ret: 0
[    8.210462] kmb-ov9282-sensor right: found expected chip id: 9281
[    8.218096] kmb-ov9282-sensor right: Probe success!
[    8.224310] kmb-ov9282-sensor left_back: read rotation variable: 180
[    8.231623] kmb-ov9282-sensor left_back: read sensor-type variable: color
[    8.239245] kmb-ov9282-sensor left_back: read aux-force variable: 0
[    8.246260] kmb-ov9282-sensor left_back: OV9282 color mode selected by default
[    8.254255] kmb-ov9282-sensor left_back: GPIO lookup for consumer reset
[    8.254261] kmb-ov9282-sensor left_back: using device tree for GPIO lookup
[    8.254294] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/left_back[0]' - status (0)
[    8.273386] kmb-ov9282-sensor left_back: read chip id, ret: 0
[    8.279307] kmb-ov9282-sensor left_back: found expected chip id: 9281
[    8.286041] kmb-ov9282-sensor left_back: Probe success!
[    8.286346] kmb-ov9282-sensor right_back: read rotation variable: 0
[    8.286352] kmb-ov9282-sensor right_back: read sensor-type variable: color
[    8.286356] kmb-ov9282-sensor right_back: read aux-force variable: 0
[    8.286359] kmb-ov9282-sensor right_back: OV9282 color mode selected by default
[    8.286388] kmb-ov9282-sensor right_back: GPIO lookup for consumer reset
[    8.286392] kmb-ov9282-sensor right_back: using device tree for GPIO lookup
[    8.286418] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/right_back[0]' - status (0)
[    8.319629] kmb-ov9282-sensor right_back: read chip id, ret: 0
[    8.325539] kmb-ov9282-sensor right_back: found expected chip id: 9281
[    8.325678] kmb-ov9282-sensor right_back: Probe success!
[    8.401806] EXT4-fs (mmcblk1p4): mounted filesystem with ordered data mode. Opts: (null)
[    8.580177] audit: type=1400 audit(1689777520.704:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=452 comm="apparmor_parser"
[    8.603642] audit: type=1400 audit(1689777520.716:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=454 comm="apparmor_parser"
[    8.626497] audit: type=1400 audit(1689777520.720:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=453 comm="apparmor_parser"
[    8.660857] audit: type=1400 audit(1689777520.720:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=453 comm="apparmor_parser"
[    8.677074] audit: type=1400 audit(1689777520.740:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslog-ng" pid=458 comm="apparmor_parser"
[    8.696856] audit: type=1400 audit(1689777520.740:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="syslogd" pid=459 comm="apparmor_parser"
[    8.713791] audit: type=1400 audit(1689777520.764:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/inbm-node" pid=460 comm="apparmor_parser"
[    8.730993] audit: type=1400 audit(1689777520.784:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=451 comm="apparmor_parser"
[    8.745430] audit: type=1400 audit(1689777520.796:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/node" pid=462 comm="apparmor_parser"
[    8.764812] audit: type=1400 audit(1689777520.824:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/dovecot/anvil" pid=464 comm="apparmor_parser"
[    9.369448] hantro_drm_probe: dev soc:media_kmb_b0@20884000 probe
[    9.381871] hantro soc:media_kmb_b0@20884000: assigned reserved memory node pixel_data_cma@0x9d000000
[    9.401693] hantroenc: HW at base <0x20884000> with ID 0x8000
[    9.423049] hx280enc: module inserted. Major <0>
[    9.429947] hantroenc: HW at base <0x208a0000> with ID 0x8000
[    9.445109] hx280enc: module inserted. Major <0>
[    9.461872] hantrodec: HW at base <0x20888000> with ID 0x8001
[    9.485048] hantrodec: HW at base <0x20888800> with ID 0x8001
[    9.508571] hantrocache: HW at base <0x20889a00> with ID 0x3000
[    9.524437] hantrocache: HW at base <0x20889820> with ID 0x3000
[    9.539913] hantrocache: HW at base <0x20889c20> with ID 0x3000
[    9.547779]  soc:media_kmb_b0@20884000:codec_reserved: assigned reserved memory node codec_reserved@480000000
[    9.566680] hantro soc:media_kmb_b0@20884000: Success: Codec reserved memory found at idx = 1, ret=0
[    9.580239] using random self ethernet address
[    9.584877] using random host ethernet address
[    9.596335] hantro_drm_probe: dev hantro probe
[    9.602309] [drm] Initialized hantro 1.0.0 20210304 for hantro on minor 1
[    9.612985] hantro device created
[    9.623926] using random self ethernet address
[    9.629453] using random host ethernet address
[    9.653522] usb0: HOST MAC 9a:af:20:96:d4:d6
[    9.665100] usb0: MAC b6:72:5c:09:94:a2
[    9.685993] usb1: HOST MAC 82:07:a1:d7:7c:80
[    9.703495] usb1: MAC ba:ee:16:5a:ca:c9
[   10.344575] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.393534] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.768497] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   10.802398] br0: port 1(usb0) entered blocking state
[   10.807514] br0: port 1(usb0) entered disabled state
[   10.818394] device usb0 entered promiscuous mode
[   10.825538] br0: port 1(usb0) entered blocking state
[   10.830587] br0: port 1(usb0) entered forwarding state
[   10.841623] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   10.856675] br0: port 2(usb1) entered blocking state
[   10.861967] br0: port 2(usb1) entered disabled state
[   10.873958] device usb1 entered promiscuous mode
[   12.521762] Bridge firewalling registered
[   13.570523] process 'docker/tmp/qemu-check254901056/check' started with executable stack
[   14.374770] dw8250_set_termios_keembay: baud= 115200 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[   14.385613] dw-apb-uart 20150000.serial: failed to request DMA
[   14.392883] dw8250_set_termios_keembay: baud= 9600 rate= 32768, new_rate= 24000000, obtained rate= 24000000
[   14.413244] dw8250_set_termios_keembay: baud= 9600 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[   14.430002] dw8250_set_termios_keembay: baud= 9600 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[   14.444982] dw8250_set_termios_keembay: baud= 9600 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[   14.455380] dw8250_set_termios_keembay: baud= 115200 rate= 24000000, new_rate= 24000000, obtained rate= 24000000
[   35.816801] sd-volt-rail: disabling

cat /etc/os-release

root@keembay:~# cat /etc/os-release
ID=luxonisos
NAME="Luxonis OS"
VERSION="1.12"
VERSION_ID=1.12
PRETTY_NAME="Luxonis OS 1.12"
DISTRO_CODENAME="dunfell"
IMAGE_REV=d238da346188461703c25a3b2e5dea32b196ad2b
BUILD_ID="20230811201312"

fip-version

root@keembay:~# fip-version
1.8.1

jakaskerl

yes, sometimes wifi exists, sometimes doesn't, can't find the pattern of this behaviour.

Hi @SamChoy
I would try the factory reset. If that doesn't solve the issue, it's likely a HW fault in which case, please write to support@luxonis.com for RMA.

Apologies for the inconvenience.

Thanks,
Jaka