Dear Luxonis Hardware Designers,

I am making an adapter board for own sensor modules to OAK FFC camera interface by taking the OAK FFC IMX378 as reference. However, I saw so mismatch in terms of labels of the pin#25 and pin#26 as below :

On the OAK FFC 4P board side, these labels are 3V3, while on the OAK FFC IMX378 side, they are VDD_5V.

There's also the mismatching order of other signals such as I2C SDA/SCL, CAM CLK/RST and MIPI lane number and polarity.

Therefore, I would like your confirmation about the correct version of the OAK FFC camera interface, please ?

Thanks and best regards,

Khang

    l4es changed the title to What is the correct version of OAK FFC camera interface? .

    l4es you are looking at the outdated camera desing we are not really selling anymore unless there is a special request from a customer that they need an older modules.
    You should be referring to the DM0260 design files which are for the "universal" OAK-FFC-CBA (Camera Board Assembly) that does support multiple different sensors and lens options.

    To answer your question, the OAK-FFC-4P design is something you soufl use as a reference and also DM0260 as if you buy new OAK-FFC-IMX378 camera modules you will get DM0260 CBA with IMX378 CCM (compact camera module).

    We will get Git updated making it clear that DM0260 is the design that replaced older BG0250TG and BG0249 designs.
    Thanks,

    Regards,

    David
    HW lead

    • l4es replied to this.

        Hi David

        Thanks very much for your confirmation.

        Best Regards,

        Khang