• Community
  • [error] Camera not detected on socket: 0

I'm having issues with the OAK OAK-FFC 3P and the ARDUCAM IMX-477 where I have no colour camera detected. I've tried the main branch of depth AI and several others with no luck, i'm pretty sure the cabling is correct and i've tried it flipped just in case all with the same results.

    I have the same issue, using OAK-FFC-IMX477-M12 sensor.
    Any help will be appreciate

    Thanks 🙂

      Enabled cameras:

      rgb : color

      left : mono

      right : mono

      DepthAI version: 2.21.2.0

      DepthAI path: C:\Users\Jordan\AppData\Local\Programs\DepthAI\venv\lib\site-packages\depthai.cp39-win_amd64.pyd

      [1844301011D4F40800] [1.7] [2.199] [system] [warning] Calibration Data on device is empty

      [1844301011D4F40800] [1.7] [2.235] [ColorCamera(2)] [error] Camera not detected on socket: 0

      Connected cameras:

      -socket LEFT : OV9282 1280 x 800 focus:fixed - MONO COLOR

      -socket RIGHT : OV9282 1280 x 800 focus:fixed - MONO COLOR

      USB speed: SUPER

      IR drivers: []

      Cam: rgb left right [host | capture timestamp]

      FPS: 0.00| 0.00 30.00| 30.00 30.00| 30.00

      JordanGell Your cable to the camera module board connect appears to be upside down. The 'strobe' lettering should be facing the other way.

      Hi I've tried it flipped and still I get the same error. Do you know if there're any other likely culprits of this issue? Also the above image was taken from the luxonis product page and shows the cable in the other orientation so if it's incorrect it might need to be updated.

      jakaskerl
      Hi,
      The issue was the board, I connected by mistake the rgb sensor to the mono socket.
      So it all good now - thanks 🙂