Hello ! I'm testing my new OAK-FFC-6P with 2 cameras IMX378-FF by running the script depthai-`python/examples/ColorCamera/rgb_preview.py` and I get some problems. (I'm using rvc3_support branch) 1. Nothing shows on screen when i lanch the script. When I try to check the queue by `print(qRgb.has())`, I always get False. To make sure that the camera is still working, I test RTSP streaming as mentioned in the documentation, and I can stream what the camera sees). 2. When I print device.getCameraSensorNames(), I got `{: 'imx412'}` knowing that my camera is IMX378. Is that normal ? Thanks for your help ! Anh Tu Nguyen

we have the same problem, device and camera get detected but it seems like no data is transmitted from the camera to the device. would appreciate any advice! Btw @"AnhTuNguyen"#p6506 , are you running depthai on the FFC-6P or on your host computer? And if you run it on the FFC-6P, did you also struggle with x11 forwarding?

@"AntoniaSchroff"#p6594 Sorry for the delay i was quite busy last week. For the first question, can you plug your camera in slot A and D and try this command `python3 cam_test.py --cameras rgb,c camd,c` with [this script](https://github.com/luxonis/depthai-python/blob/rvc3_support/utilities/cam_test.py). I dont know if you gonna have this problem or not, but I got another problem on my FFC-6P. I will describe the problem and also the solution here. Hope that can help you if you get the same: 1. Slot D on the FFC 6P doesnt correspond to socket depthai.CameraBoardSocket.CAM_D but depthai.CameraBoardSocket.CAM_F. And Slot D corresponds to depthai.CameraBoardSocket.CAM_D. 2. Slot RGB cannot run at the same time as other RGB slots. When I tested to plut cameras to Slot RGB and D at the same time, depthai only recognized RGB via device.getConnectedCameraFeatures():. Same thing happened when I used Slot RGB and Slot F. When I tested Slot D and Slot F, it worked. For the 2nd question, I'm running FFC-6P from my host computer.

@"MartinR"#p6675 Thanks alot I'll try to flash the device with LuxonisOS 1.2 !!

OAK-FFC-6P with OAK-FFC-IMX378-FF

AnhTuNguyen

Hello !

I'm testing my new OAK-FFC-6P with 2 cameras IMX378-FF by running the script depthai-python/examples/ColorCamera/rgb_preview.py and I get some problems. (I'm using rvc3_support branch)

Nothing shows on screen when i lanch the script. When I try to check the queue by print(qRgb.has()), I always get False. To make sure that the camera is still working, I test RTSP streaming as mentioned in the documentation, and I can stream what the camera sees).
When I print device.getCameraSensorNames(), I got {<CameraBoardSocket.RGB: 0>: 'imx412'} knowing that my camera is IMX378. Is that normal ?

Thanks for your help !

Anh Tu Nguyen

AntoniaSchroff

we have the same problem, device and camera get detected but it seems like no data is transmitted from the camera to the device. would appreciate any advice!

Btw AnhTuNguyen , are you running depthai on the FFC-6P or on your host computer? And if you run it on the FFC-6P, did you also struggle with x11 forwarding?

AnhTuNguyen

AntoniaSchroff Sorry for the delay i was quite busy last week.
For the first question, can you plug your camera in slot A and D and try this command python3 cam_test.py --cameras rgb,c camd,c with this script.

I dont know if you gonna have this problem or not, but I got another problem on my FFC-6P. I will describe the problem and also the solution here. Hope that can help you if you get the same:

Slot D on the FFC 6P doesnt correspond to socket depthai.CameraBoardSocket.CAM_D but depthai.CameraBoardSocket.CAM_F. And Slot D corresponds to depthai.CameraBoardSocket.CAM_D.
Slot RGB cannot run at the same time as other RGB slots. When I tested to plut cameras to Slot RGB and D at the same time, depthai only recognized RGB via device.getConnectedCameraFeatures():. Same thing happened when I used Slot RGB and Slot F. When I tested Slot D and Slot F, it worked.

For the 2nd question, I'm running FFC-6P from my host computer.

MartinR

Hi, AnhTuNguyen, @AntoniaSchroff's colleague here.

Thanks for the info! For the record, we're facing the same issues - remapped sockets and the RGB/CAM_A slot preventing RGB cameras on other sockets from working. Similarly, when the RGB cameras are on D, E, or F sockets, they work.

The mapping of our sockets is (board markings -> API): A->A, SA->B, SB->C, D->F, E->D, F->E.

Going back to your first post in this thread, our RGB sensors also get recognized as "imx412", we use IMX477. Prior to flashing the device with the LuxonisOS 1.2 as described in the "Luxonis S3 Dev Kit" document, the sensors were recognized correctly.

AnhTuNguyen

MartinR Thanks alot I'll try to flash the device with LuxonisOS 1.2 !!

erik

Hi everyone,
I apologize for the inconvenience, we will be releasing RVC3 documentation hopefully next week.
Thanks, Erik

erik

https://docs.luxonis.com/projects/hardware/en/latest/pages/DM3390.html#getting-started some additional docs here