we bought an oak d pro poe camera, for the gaze estimation application, so once we have the camera, what all steps need to do from starting, mainly need images from the stereo camera, i read the document but did nt get the idea of hardware connections and installation process and all? can you give a brief idea about this?
Hi ThasnimolVSam22d007 , For hardware connections, please see Getting started with OAK PoE devices. Would this help? Thanks, Erik
Hi erik actually i bought oak d pro FF-POE CAMERA, BUT IT IS HAVING SOMEOTHER PINS LIKE THIS, SO CAN YOU PLEASE TELL ME HOW TO CONNECT IT , TILL NOW NOT ABLE TO PIN IT PROPERLY. LOOKS LIKE THAT PLASTIC IS MOVING FROM THER
Hi ThasnimolVSam22d007 , Please use the M12 to RJ45 ethernet cable you got with your camera. The plastic cap is for M8 connector. Please see docs here. Thanks, Erik
Can you please give online session for how to conenct and capture images, means how to see the images in that above demo, what all softwares needs install and all
Hi ThasnimolVSam22d007 , For setup, please follow docs here. Thanks, Erik
erik OK SIR
mEANS I WANT TO KNOW , FOR WORKING WITH THIS CAMERA, WHICH ALL THINGS NEED TO INSTALL,? ALSO, BASICALLY HOW TO CAPTURE IMAGES USING THAT SOFTWARE, THEN WILL TAKECARE OF REMAINING THINGS, , CAN YOU PLEASE HELP ME TO SORT IT OUT?
one more thing i connected poe injector to the system , to the camera, and one pin to power supply, so apart from this one extra wire and one programming wire is with the kit,so where to connect those two? (image of both is attached)
What is the use of that programming board, ididnt see anything related to it in documentation
Basically i want to check whether the camera which i bought is working or not? initially? how to do this
currently, when am connecting the camera to poe of poe injector, then its lan to the system, but system only having one port, so how to match the ip address for all? i am using neutrik poe, so i how come i will match all ip adress while using this device
Hi erik, thank you for your help i completed the installation succesfully, but while running demo, ir led s are not turning on? how to make it turning on ? i want to capture some monocamera images using i, how to do it
Hi ThasnimolVSam22d007 , Please see docs here. Thanks, Erik
