Hello Luxonis Support,
We use an OAK4 for conveyor-based label application. In stationary, the native depth boundary is shifted downward relative to the object boundary in the rectified left image: the upper edge is eroded and the lower edge extends downward. This is visible before RGB ImageAlign. Native depth here includes the configured StereoDepth post-processing.
Environment: OAK4-D-PRO-AF, Luxonis OS 1.45.0, DepthAI 3.10.0, native resolution 640 x 400. Saved settings have Extended Disparity and Subpixel enabled.
Measured boundary offsets (positive = downward; median of 20 frames per condition):
Condition Top (px) Bottom (px)
Workpiece 1, Dot 0.2 +1.67 +3.19
Workpiece 2, Dot 0.2 +5.76 +6.13
SGM A: P1=20, P2=85, Dot 0.1 +7.24 +9.33
SGM B: P1=20, P2=40, Dot 0.1 +4.28 +6.31
SGM C: P1=10, P2=40, Dot 0.1 +5.17 +7.27
Adaptive SGM penalties were disabled for A/B/C. Changing P1/P2 reduced the bias but did not eliminate it. These were sequential captures without a return-to-A control, so the exact cause remains unconfirmed.
Could you help identify which processing stage causes this boundary bias, and recommend settings or a software fix to improve boundary accuracy? Please let us know if additional outputs or a minimal reproduction are needed.
The ZIP contains one original frame set per condition (rectified left/right, native depth, disparity and confidence), camera settings, calibration, timing metadata, and the 100-frame measurement table. The reported medians use all 20 frames; only frame index 10 from each condition is included as images.
Thank you