Hello guys. Thanks for the support so far for luxonis products so far . I have a very specific metrology problem to solve that needs the use of the following hardware on the OAK 4pFFC : * One Stereo pair on sockets B and C that consists of AR0234 cameras (since they are 2 lanes on RVC2) * One 33D ToF camera for physical depth perception on socket A or D , either is fine. Would those sensors work nicely together ? Thanks .

Hardware validation

BearrGod

Hello guys.

Thanks for the support so far for luxonis products so far .

I have a very specific metrology problem to solve that needs the use of the following hardware on the OAK 4pFFC :

One Stereo pair on sockets B and C that consists of AR0234 cameras (since they are 2 lanes on RVC2)
One 33D ToF camera for physical depth perception on socket A or D , either is fine.

Would those sensors work nicely together ?

Thanks .

OskarSonc

Hey BearrGod - yes, that setup should be fine.

The main restriction is that you should not use ToF 33D on both CAM_B and CAM_C at the same time, since those two ports share I2C and can conflict when calibration data is read, but that doesn't seem to be your case.

Just keep in mind that FFC setups will need proper calibration after mounting.

Thanks,
Oskar

BearrGod

Thanks a lot for your response. I will proceed with that setup .