Hi erik
"Our plan is to have 2x AR0234 and M12 holes in the enclosure to change the lens. Thoughts?"
I would suggest to ship this product with two sets of M12 rectilinear lenses: One set of Narrow HFOV (e.g. around 40 to 50 deg) and one set of Wide HFOV (e.g. around 80 to 120 deg). Also the unit should store manufacturing calibrated matrixes for these two sets of lenses. The shipping configuration for example could be preinstalled Narrow_FOV lenses and the default LensMode.Narrow_FOV, such that the rectifiedLeft/Right will assume to apply the Narrow_FOV stereo calibrated matrixes. If user would like to change the lenses to Wide_FOV, then in programming, after user changed the lenses themselves and then need to set LensMode.Wide_FOV to produce correct rectifiedLeft/Right output.
The reason of requesting to ship two lenses sets is a convenient product configuration for an end user like me. Such that I don't need to go out and do the rectilinear lenses sourcing myself and sometime cannot get a quality rectilinear lenses with low quantity like 2 lenses ; ) What do you think?
