Thanks, @DrewBarfield ,
And here is a slightly-less-expensive POE variant, 24-ports with 250W POE (which is way more than enough; OAK-D-POE is under 6.5W per device), US-24-250W:
(It's also available from Ubiquiti directly, here, but appears to be out of stock there at the time of writing this.)
And thanks for the complete list (will share my own complete version in a follow-up post, but for now, some notes). On that cable - often these all-in-one cables with the larger rubber sheeths do not fit into the IP67 glands - as the IP67 glands are designed for "Pro" installs - which usually means cables that are made on-site.
So while you can use them with the device, it might not fit in the IP67 boot - resulting in not being able to use the IP67 boot - and thereby preventing the device from being sealed/waterproof.
So what I'd recommend actually is something like TOUGHCable PRO, here with the connectors here.
This allows you to make any length cable you need for the install.
So if you do want pre-made cables, I'd recommend something like the Monoprice ZEROboot:
Note that this is not shielded though, so would be recommended for indoor-use only. I can't seem to find a no-boot shielded, pre-made cable.
And to be clear - some boots will actually fit inside the IP67 gland, but it often requires testing to find out which ones do (as in most IP67 applications a custom-length cable is made which then does not have a boot).