I'm trying to access the IMU on my Oak-D Lite. According to the hardware documentation, the early Lite cameras didn't come with an IMU, but the newer ones are equipped with an BMI270 sensor. I bought my cameras about half a year ago, so I assume, they are properly equipped …or aren't they? Is there any way to make sure?

When I run the IMU example, I get the following error:

RuntimeError: IMU(0) - IMU invalid settings!: IMU not detected. Your board doesn't have IMU or requires firmware update (Set imu.enableFirmwareUpdate(True) explicitly.). 1, 321

Running the IMU update script, however, yields the following:

(venv_mission) pi@drone-pi:~ $ python update.py

IMU type: NONE, firmware version: 0.0.0, embedded firmware version: 0.0.0

Warning! Flashing IMU firmware can potentially soft brick your device and should be done with caution.

Do not unplug your device while the IMU firmware is flashing.

Type 'y' and press enter to proceed, otherwise exits:

y

IMU FW update status: 0.0%

IMU FW update status: 0.0%

Firmware update failed!

My camera is connected via a working USB3 cable (one that came with an Oak-D Pro) and works fine otherwise.

Best regards.

    Hi blank
    Looks like a hardware issue (eg. missing IMU). Similar post here. Please write to support@luxonis.com for a replacement and link this thread.

    Sorry for the inconvenience.

    Regards,
    Jaka

    15 days later

    I have the same exact problem, do you have any suggestions on how to do imu synchronization? because I will be adding this camera to my drone which has its own imu so I thought about synchronizing the drone's imu with the camera examples

      A quick update: I followed @jakaskerl 's advice and contacted the support. It seems that batches without IMU are still being sold and that I was lucky enough to get one. This should really be made more clear, as the shop page gives the impression that all Lite cameras have an IMU.

      The support offered to exchange my camera for one with IMU and autofocus. However just as @Ghada 's camera, mine will go under a drone, thus autofocus should be avoided. I hope there are any FF cameras with IMU at all. I'll report back if there is any interesting change.

      9 months later

      I have the same issue, Oak-D Lite Fixed Focus and no IMU, just bought this month. Did you ever got a FF with IMU? @blank

      17 days later

      Customer support was helpful but unfortunately after one week without the product I paid for, the replacement I got was used (had scratches, came without protective plastic) and doesn't seem to have a IMU neither. I will try to return it through the retailer (although because of trusting the manufacturer now I am outside the deadline for a return and it probably won't be possible). Really bad experience, won't buy anything else from Luxonis and cannot recommend.

      10 months later

      Was an early kickstarter backer for the oak-D-lite, just got rejected a replacement because it was years ago. fair but you did promise webcam support years ago too so… yeah dont buy these products they have lackluster support and any issues you have are fixed with spending $100 on their next gen product.

        jakaskerl there are a bunch of caveats, it is not a usable Webcam, the fact I need a python program running for a zoom meeting is wild. Official Webcam support on the kickstarter stretch goal would be considered not met by a majority of users. Be honest with yourselfs please.