Hello. My company bought 5 cameras. 4 OAK-D s2 POE and 1 OAK-D LR.

My problem is, I cant connect to cameras. Only 1 camera i can, but if I connect another one, then I get an error.
I am attaching the screenshots from error. If i connect usb camera and 1 lan camera, working well. But if in switch more than 1, error.

I have win10. Depthai 2.22.0.0.

  • erik replied to this.

    Hi IstvnBalog ,
    For the POE cameras, I would first try them outside the multi-devices - does that work? I would also suggest PoE Troubleshooting docs, especially the "Special network equipment", and perhaps VPN / WiFi connection.

      Thank you for quick answer. If there are several cameras on the switch at the same time, I can only start 1camera in multi-devices mode. The other cameras are x_link_device_not found. If I connect the another camera in usb, then working the usb and the 1 camera in lan, if the lan have only 1 camera connected.

        Hi IstvnBalog
        Can you use the device_manager.py to view all accessible devices?
        Only connect through the switch, not the USB.

        You should be seeing 4 POE devices and their MXIDs.

        Thanks,
        Jaka

            Hi jakaskerl .

            Yes I can, and in device manager I see all my cameras. Now I have 2 cameras connected. I attaching few screenshot. The 18443010C19F950F00 camera connecting all time.




              Thanks for the help. I solved the problem. First of all, I turned off the vpn, then I changed it to 30000 and 90000 in the device manager. And the ipv4 is like in screenshot.